next up previous contents
Next: 4.5.3.10 Segment Preprocessing Setup Up: 4.5.3 PROMIS-NT Model Classes Previous: 4.5.3.8 Coefficient Setup


4.5.3.9 Assembly of Coefficients for Boundary Models

Models of the type BoundaryCoefficientSetupModel are used to associate MDL Model classes with the coefficients of the boundary equations (4.6) - (4.10). Similar to the interface of CoefficientSetupModel classes their interface parameters form a list of associative arrays described in Table 4.15.


Table 4.15: PROMIS-NT boundary coefficient setup Parameters
Name Type Description
beta11 XmdModelMatrix
Associative list specifying $\beta^{11}$ coefficients within the boundary model
beta12 XmdModelMatrix
Associative list specifying $\beta^{12}$ coefficients within the boundary model
beta21 XmdModelMatrix
Associative list specifying $\beta^{21}$ coefficients within the boundary model
beta22 XmdModelMatrix
Associative list specifying $\beta^{22}$ coefficients within the boundary model
phi1 XmdModelMap
Associative list specifying $\phi^1$ coefficients within the boundary model
phi2 XmdModelMap
Associative list specifying $\phi^2$ coefficients within the boundary model
dirichlet XmdMdlStingMap
Associative list [C1] $\rightarrow$ C2, specifying the Dirichlet boundary condition $C^1 = C^2$
dirichlet1 XmdDoubleMap
Associative list specifying the Dirichlet quantity values of the 1st segment connected to the boundary
dirichlet2 XmdDoubleMap
Associative list specifying the Dirichlet quantity values of the 2nd segment connected to the boundary
dirichletModel XmdModelMap
Associative list [Quantity] $\rightarrow$ MDL class used for the computation of the Dirichlet quantity values

next up previous contents
Next: 4.5.3.10 Segment Preprocessing Setup Up: 4.5.3 PROMIS-NT Model Classes Previous: 4.5.3.8 Coefficient Setup
Robert Mlekus
1999-11-14