Bibliography

1

S.P. Ahlen,
``Theoretical and Experimental Aspects of the Energy Loss of Relativistic Heavily Ionizing Particles,''
Rev.Mod.Phys., vol. 52, no. 1, pp. 121-173, 1980.

2

H.H. Andersen and J.F. Ziegler,
Hydrogen Stopping Powers and Ranges in All Elements,
vol. 3 of The Stopping and Ranges of Ions in Matter,
Pergamon Press, New York, 1977.

3

R.J. Baker, H.W. Li, and D.E. Boyce,
CMOS Circuit Design, Layout, and Simulation,
IEEE Press, New York, 1998.

4

H. Bethe,
``Zur Theorie des Durchgangs schneller Korpuskularstrahlen durch Materie.,''
Annalen der Physik, vol. 5, pp. 325-400, 1930.

5

M. Blackman,
Kristallphysik,
vol. 7.1 of Handbuch der Physik,
Springer, Berlin, 1955.

6

F. Bloch,
``Brensvermögen von Atomen mit mehreren Electronen.,''
Zeitschrift für Physik, vol. 81, pp. 363-376, 1930.

7

W. Bohmayr,
Simulation der Ionenimplantation in Kristalline Siliziumstrukturen,
Dissertation, Technische Universität Wien, 1995.

8

W. Bohmayr, A. Burenkov, J. Lorenz, H. Ryssel, and S. Selberherr,
``Statistical Accuracy and CPU Time Characteristic of Three Trajectory Split Methods for Monte Carlo Simulation of Ion Implantation,''
In H. Ryssel and P. Pichler, editors, Simulation of Semiconductor Devices and Processes, vol. 6, pp. 492-495, Springer, Wien, Austria, 1995.

9

W. Bohmayr, A. Burenkov, J. Lorenz, H. Ryssel, and S. Selberherr,
``Trajectory Split Method for Monte Carlo Simulation of Ion Implantation,''
IEEE Trans.Semiconductor Manufacturing, vol. 8, no. 4, pp. 402-407, 1995.

10

N. Bohr,
``On the Theory of the Decrease of Velocity of Moving Electrified Particles on Passing Through Matter,''
The London, Edinburgh and Dublin Philosophical Magazine and Journal of Science, vol. 6, pp. 10-31, 1913.

11

N. Bohr,
``The Penetration of Atomic Particles Through Matter,''
Mat.Fys.Medd.Dan.Vid.Selsk., vol. 18, no. 8, pp. 142-143, 1948.

12

M.D.J. Bowyer, D.G. Ashworth, and R. Oven,
``Representation of Two-Dimensional Ion Implantation Rest Distributions by Pearson Distribution Curves for Silicon Technology,''
Solid-State Electron., vol. 39, no. 1, pp. 119-126, 1996.

13

W. Brandt and M. Kitagawa,
``Effective Stopping-Power Charges of Swift Ions in Condensed Matter,''
Physical Review B, vol. 25, no. 9, pp. 5631-5637, 1982.

14

A. Burenkov, K. Tietzel, A. Hössinger, J. Lorenz, H. Ryssel, and S. Selberherr,
``A Computationally Efficient Method for Three-Dimensional Simulation of Ion Implantation,''
In Simulation of Semiconductor Processes and Devices, pp. 55-58, Kyoto, Japan, 1999.

15

T. Diaz de la Rubia and G.H. Gilmer,
``Structural Transformation and Defect Production in Ion Implanted Silicon: A Molecular Dynamics Simulation Study,''
Nuclear Instruments and Methods in Physics Research, vol. 74, no. 13, pp. 2507 - 2510, 1995.

16

R. Dizon, H. Han, A.G. Russell, and M.L. Reed,
``An Ion Milling Pattern Transfer Technique for Fabrication of Three-Dimensional Micromechanical Structures,''
IEEE J.Microelectromech.Syst., vol. 2, no. 4, pp. 151-159, 1993.

17

A. Dygo, P.J.M. Smulders, and D.O. Boerma,
``Simulation Analysis of Ion Channeling Spectra: Thermal Vibrational Amplitude in Si,''
Nucl.Instr.Meth.B, vol. 64, pp. 701-705, 1992.

18

F.H. Eisen, G.J. Clark, J. Bøttiger, and J.M. Poate,
``Stopping Power of Energetic Helium Ions Transmitted Through Thin Silicon Crystals in Channeling and Random Directions,''
Rad.Eff., vol. 13, pp. 93-100, 1972.

19

B. El-Kareh,
Fundamentals of Semiconductor Processing Technologies,
Kluwer, Boston, 1995.

20

F. Faggin and T. Klein,
``Silicon Gate Technology,''
Solid-State Electron., vol. 13, pp. 1125-1144, 1970.

21

F. Fasching,
The Viennese Integrated System for Technology CAD Applications-Data Level Design and Implementation,
Dissertation, Technische Universität Wien, 1994.

22

F. Fasching, C. Fischer, S. Selberherr, H. Stippel, W. Tuppa, and H. Read,
``A PIF Implementation for TCAD Purposes,''
In W. Fichtner and D. Aemmer, editors, Simulation of Semiconductor Devices and Processes, vol. 4, pp. 477-482, Hartung-Gorre, Konstanz, 1991.

23

C. Froese-Fischer,
The Hartree-Fock method for atoms: a numerical approach,
Wiley, New York, 1977.

24

A.F. Gérodolle and J. Pelletier,
``Two-Dimensional Implications of a Purely Reactive Model for Plasma Etching,''
IEEE Trans.Electron Devices, vol. 38, no. 9, pp. 2025-2032, 1991.

25

S.K. Ghandhi,
VLSI Fabrication Principles: Silicon and Gallium Arsenide,
Wiley, New York, second ed., 1994.

26

J.F. Gibbons, W.S. Johnson, and S.W. Mylroie,
Projected Range Statistics,
Halstead Press, Strandsberg, 1975.

27

J.F. Gibbons and S. Mylroie,
``Estimation of Impurity Profiles in Ion-Implanted Amorphous Targets Using Joined Half-Gaussian Distributions,''
Appl.Phys.Lett., vol. 22, no. 11, pp. 568-569, 1973.

28

P. Gombas,
Die statistische Theorie des Atoms und ihre Anwendungen,
Springer, Wien, 1949.

29

L. Gong, S. Bogen, L. Frey, W. Jung, and H.Ryssel,
``Analytical Description of High Energy Implantation Profiles of Boron and Phosphorus into Crystalline Silicon,''
Radiation Effects and Defects in Solids, vol. 127, no. 3-4, pp. 385-395, 1994.

30

G. Hobler,
Simulation der Ionenimplantation in ein-, zwei- und dreidimensionalen Strukturen,
Dissertation, Technische Universität Wien, November 1988.

31

G. Hobler,
Physikalische Modellierung der Ionenimplantation in Silizium,
Habilitationsschrift, Technische Universität Wien, 1995.

32

G. Hobler,
``Net Point Defect Concentrations after Ion Implantation in Silicon,''
In Proceedings of the Fourth International Symposium on Process Physics and Modelling in Semiconductor Technology, pp. 509-521, 1996.

33

G. Hobler, E. Langer, and S. Selberherr,
``Two-Dimensional Modeling of Ion Implantation with Spatial Moments,''
Solid-State Electron., vol. 30, no. 4, pp. 445-455, 1987.

34

G. Hobler, P. Pichler, and K. Wimmer,
PROMIS 1.5 User Guide,
Institut für Mikroelektronik, Technische Universität Wien, 1991.

35

G. Hobler, H. Pötzl, L. Gong, and H. Ryssel,
``Two-Dimensional Monte Carlo Simulation of Boron Implantation in Crystalline Silicon,''
In W. Fichtner and D. Aemmer, editors, Simulation of Semiconductor Devices and Processes, vol. 4, pp. 389-398, Hartung-Gorre, Konstanz, 1991.

36

G. Hobler, H. Pötzl, L. Palmetshofer, R. Schork, J. Lorenz, C. Tian, S. Gara, and G. Stingeder,
``An Empirical Model for the Electronic Stopping of Boron in Silicon,''
COMPEL, vol. 10, no. 4, pp. 323-330, 1991.

37

G. Hobler, A. Simionescu, L. Palmetshofer, C. Tian, and G. Stingeder,
``Boron Channeling Implantations in Silicon: Modeling of Electronic Stopping and Damage Accumulation,''
J.Appl.Phys., vol. 77, no. 8, pp. 3697-3703, 1995.

38

W.K. Hofker,
``Concentration Profiles of Boron Implantations in Amorphous and Polycrystalline Silicon,''
Philips Res.Rep., vol. 8, pp. 41-57, 1975.

39

M. Inokuti, Y. Itikawa, and J.E. Turner,
``Inelastic Collisions of Fast Charged Particles with Atoms and Molecules - The Bethe Theory Revisited,''
Review of Modern Physics, vol. 50, no. 1, pp. 23-35, 1978.

40

F. Jahnel, H. Ryssel, G. Prinke, K. Hoffmann, K. Müller, J. Biersack, and R. Henkelmann,
``Description of Arsenic and Boron Profiles Implanted in SiO$_2$, Si$_3$N$_4$ and Si Using Pearson Distributions with Four Moments,'' Nucl.Instr.Meth., vol. 182/183, pp. 223-229, 1981.

41

M. Jaraiz, J. Arias, E. Rubio, L.A. Marqués, L. Pelaz, L. Bailón, and J. Barbolla,
``Dechanneling by Thermal Vibrations in Silicon Ion Implantation,''
In 10. Int. Conf. on Ion Implantation Technology, p. 2.19, Catania, Italy, 1994.

42

H. Jensen,
``Die Ladungsverteilung in Ionen und die Gitterkonstante des Rubidiumbromids nach der statistischen Methode,''
Z. F. Physik, vol. 77, pp. 722, 1932.

43

R.A. Johnson,
``Empirical Potentials and their Use in the Calculation of Energies of Point Defects in Metals,''
J.Phys.F, vol. 3, no. 2, pp. 295-321, 1973.

44

G.H. Kinchin and R.S. Pease,
``The Displacement of Atoms in Solids by Radiation,''
Reports on Progress in Physics, vol. 18, pp. 1-51, 1955.

45

Ch. Kittel,
Introduction to Solid State Physics,
Wiley, New York, sixth ed., 1986.

46

K.M. Klein, C. Park, and A.F. Tasch,
``Modeling of Cumulative Damage Effects on Ion-Implantation Profiles,''
Nucl.Instr.Meth.B, vol. 59/60, pp. 60-64, 1991.

47

W. Kohn and L.J. Sham,
``Self-consistent equations including exchange and correlation effects.,''
Physical Review A, vol. 140, pp. 1133, 1995.

48

H.J. Leamy, G.E. Pike, and C.H. Seager,
Grain Boundaries in Semiconductors,
North Holland, 1982.

49

W. Lenz,
``Über die Anwendbarkeit der Statistischen Methode auf Ionengitter,''
Z. F. Physik, vol. 77, pp. 713, 1932.

50

J. Lindhard,
``On the Properties of a Gas of Charged Particles,''
Mat.Fys.Medd.Dan.Vid.Selsk., vol. 28, no. 8, pp. 57, 1954.

51

J. Lindhard and M. Scharff,
``Energy Dissipation by Ions in the keV Region,''
Physical Review, vol. 124, no. 1, pp. 128-130, 1961.

52

U. Littmark and J.F. Ziegler,
``Handbook of Range Distributions of Energetic Ions in All Elements,''
Techn. Report 34401, IBM, San Jose, 1979.

53

U. Littmark and J.F. Ziegler,
``Ranges of Energetic Ions in Matter,''
Physical Review A, vol. 23, no. 1, pp. 64-72, 1981.

54

J. Lorenz, A. Barthel, L. Gong, H.Ryssel, and R.J. Wierzbicki,
``Analytical Description of Ion Implantation Profiles,''
Radiation Effects and Defects in Solids, vol. 127, no. 3-4, pp. 385-395, 1994.

55

J. Lorenz, K. Tietzel, A. Burenkov, and H. Ryssel,
``Three-Dimensional Simulation of Ion Implantation,''
In Simulation of Semiconductor Processes and Devices, pp. 23-24, Business Center for Academic Societies Japan, Tokyo, Japan, 1996.

56

J. Lorenz, R.J. Wierzbicki, and H.Ryssel,
``Analytical Modeling of Lateral Implantation Profiles,''
Nuclear Instruments and Methods in Physics Research, vol. B96, no. 1-2, pp. 168-172, 1995.

57

R.J. Mathar and M. Posselt,
``Effective-Charge Theory for the Electronic Stopping of Heavy Ions in Solids: Stripping Criteria and Target-Electron Models,''
Physical Review B, vol. 51, no. 1, pp. 107-116, 1995.

58

G. Molière,
``Theorie der Streuung schneller geladener Teilchen I: Einzelstreuung am abgeschirmten Coulomb-Feld,''
Z.Naturforschung, vol. 2a, pp. 133-145, 1947.

59

V.L. Moruzzi, J.F. Janak, and A.R. Williams,
Calculated Electronic Properties of Metals,
Pergamon Press, Oxford, 1978.

60

M.J. Norgett, M.T. Robinson, and I.M. Torrens,
``A Proposed Method of Calculating Displacement Dose Rates,''
Nucl.Eng.Des., vol. 33, pp. 50-54, 1975.

61

O.S. Oen and M.T. Robinson,
``Computer Studies of the Reflection of Light Ions from Solids,''
Nucl.Instr.Meth., vol. 132, pp. 647-653, 1976.

62

C. Park, K.M. Klein, and A.F. Tasch,
``Efficient Modeling Parameter Extraction for Dual Pearson Approach to Simulation of Implanted Impurity Profiles in Silicon,''
Solid-State Electron., vol. 33, no. 6, pp. 645-650, 1990.

63

M. Posselt,
``Channeling Effects and Defect Accumulation in Ion Implantation,''
Nucl.Instr.Meth.B, vol. 90, pp. 373-377, 1994.

64

M. Posselt,
``Crystal-TRIM and its Application to Investigations on Channeling Effects during Ion Implantation,''
Radiation Effects and Defects in Solids, vol. 130-131, pp. 87-119, 1994.

65

M. Posselt,
``A Novel Method to Investigate Ion-Beam-Induced Defect Evolution in Si,''
In Electrochemical Society Proceedings, vol. 99-2, pp. 58 - 74, Seatle, Washington, USA, 1999.

66

E. Rimini,
Ion Implantation: Basics to Device Fabrication,
Kluwer, Boston, 1995.

67

H. Ryssel,
``Implantation and Diffusion Models for Process Simulation,''
In K.M. DeMeyer, editor, VLSI Process and Device Modeling, pp. 1-41. Katholieke Universiteit Leuven, 1983.

68

H. Ryssel, W. Krüger, and J. Lorenz,
``Comparison of Monte Carlo Simulations and Analytical Models for the Calculation of Implantation Profiles in Multilayer Targets,''
Nuclear Instruments and Methods in Physics Research, vol. B19-20, pp. 40-44, 1987.

69

H. Ryssel, G. Prinke, K. Haberger, K. Hoffmann, K. Müller, and R. Henkelmann,
``Range Parameters of Boron Implanted into Silicon,''
Appl.Phys.A, vol. 24, pp. 39-43, 1981.

70

G. Schumicki and P. Seegebrecht,
Prozeßtechnologie,
Springer, 1991.

71

S. Selberherr,
Analysis and Simulation of Semiconductor Devices,
Springer, 1984.

72

Semiconductor Industry Association,
The National Technology Roadmap for Semiconductors,
1999, http://notes.sematech.org/1999_SIA_Roadmap/Home.htm.

73

A. Simionescu,
Monte-Carlo-Simulation der Ionenimplantation in kristallinem Silizium,
Dissertation, Technische Universität Wien, 1995.

74

A. Simionescu, S. Herzog, G. Hobler, R. Schork, J. Lorenz, C. Tian, and G. Stingeder,
``Modeling of Electronic Stopping and Damage Accumulation during Arsenic Implantation in Silicon,''
Nuclear Instruments and Methods in Physics Research B, vol. 100, no. 4, pp. 483 - 489, 1995.

75

A. Simionescu, G. Hobler, S. Bogen, L. Frey, and H. Ryssel,
``Model for the Electronic Stopping Power of Channeled Ions in Silicon around the Stopping Power Maximum,''
Nucl.Instr.Meth.B, vol. 106, pp. 47-50, 1995.

76

M. Snir, S. Otto, S. Huss-Lederman, D. Walker, and J. Dongarra,
MPI--The Complete Reference, The MPI Core,
vol. 1, MIT Press, Cambridge, Massachusetts, 2nd ed., 1998.

77

A. Sommerfeld,
``Asymptotische Integration der Differentialgleichung des Thomas-Fermischen Atoms,''
Z.Phys., vol. 78, pp. 283-309, 1932.

78

H. Stippel,
Simulation der Ionen-Implantation,
Dissertation, Technische Universität Wien, 1993.

79

H. Stippel and S. Selberherr,
``Monte Carlo Simulation of Ion Implantation for Three-Dimensional Structures Using an Octree,''
IEICE Trans.Electronics, vol. E77-C, no. 2, pp. 118-123, 1994.

80

K. Suzuki, R. Sudo, and T. Feudel,
``Simple Analytical Expression for Dose Dependent Ion-Implanted Sb Profiles using a Joined Half Gaussian Function and One with Exponential Tail,''
Solid-State Electron., vol. 42, no. 3, pp. 463-465, 1998.

81

K. Suzuki, R. Sudo, T. Freudel, and W. Fichtner,
``Compact and Comprehensive Database for Ion-Implanted As Profiles,''
IEEE Trans.Electron Devices, vol. 47, no. 1, pp. 44-49, 1985.

82

K. Suzuki, R. Sudo, Y. Tada, M. Tomotani, Th. Feudel, and W. Fichtner,
``Comprehensive Analytical Expression for Dose Dependent Ion-Implanted Impurity Concentration Profiles,''
Solid-State Electron., vol. 42, no. 9, pp. 1671-1678, 1998.

83

S.M. Sze,
Physics of Semiconductor Devices,
Wiley, New York, second ed., 1981.

84

K. Tabatabaie-Alavi and I. W. Smith,
``Channeling, Exponential Tails and Analytical Modeling of Si Implants into GaAs,''
IEEE Trans.Electron Devices, vol. 37, no. 1, pp. 96-106, 1990.

85

S. Tian, M.F. Morris, S.J. Morris, B. Obradovic, G. Wang, Al F. Tasch, and Ch.M. Snell,
``A Detailed Physical Model for Ion Implant Induced Damage in Silicon,''
IEEE Trans.Electron Devices, vol. 45, no. 6, pp. 1226-1238, 1998.

86

S. Tian, S.J. Morris, M. Morris, B. Obradovic, and A.F. Tasch,
``Monte Carlo Simulation of Ion Implantation Damage Process in Silicon,''
In Int.Electron Devices Meeting, pp. 713-716, 1996.

87

R.J. Wierzbicki, J. Lorenz, and A. Barthel,
``Simulation of Ion Implantation into Multilayer Structures,''
In A. Heuberger, H. Ryssel, and P. Lange, editors, 19th European Solid State Device Research Conference - ESSDERC'89, pp. 193-197, Springer, Berlin, 1989.

88

W.D. Wilson, L.G. Haggmark, and J.P. Biersack,
``Calculations of Nuclear Stopping, Ranges, and Straggling in Low-Energy Region,''
Physical Review B, vol. 15, no. 5, pp. 2458-2468, 1977.

89

K. Wimmer,
Two-Dimensional Nonplanar Process Simulation,
Dissertation, Technische Universität Wien, 1993.

90

J.F. Ziegler, editor,
Ion Implantation: Science and Technology,
Academic Press, Orlando, 1984.

91

J.F. Ziegler,
Ion Implantation Science and Technology,
Ion Beam Press, 1996.

92

J.F. Ziegler, J.P. Biersack, and U. Littmark,
The Stopping and Range of Ions in Solids,
vol. 1 of The Stopping and Ranges of Ions in Matter,
Pergamon Press, New York, 1985.